Beancooker
Spoolin' Past You
Offline
10401 posts
'09 Blandmobile
Rain City WA
6-26-2006
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (krytiuk) | 7:28 PM 1/23/2008 |
|
I am not sure if anyone in the G35 forum has twin turbod their car. I know that the Moderator of the 350Z forum "Turbo6" has put twins on his, and IIRC, he's putting out well over 450HP. He also built his entire engine, to accommodate the extra power. He is most well known for his 9.38 second @ 147 MPH Lexus SC300. Check it out at http://www.turbo6.netThis was copied from an article speaking of "Turbo6" aka, Hal. "Hal is now working for Injected Performance out of Lexington, KY (one of our sponsors), he is in charge of building and tuning their race cars. Most recently, they put down over 1000rwhp through an automatic on a Dyno Dynamics Dyno on their 4.2L VQ stroker, GT47-88 powered 350Z. He also owns a twin turbo 350Z that is his own personal car in addition to the SC300."
| Quote, originally posted by numbnuts240 » | | you know what else is unnecessary? nipples on dudes. why do we have them? |
|
2mhighside
Offline
147 posts
06 G35 Coupe MT
Granbury TX
9-20-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (krytiuk) | 11:50 AM 1/24/2008 |
|
I think Beancooker is right there isnt anyone here with the TT setup. I just installed the Turnonetics single. Unfortunately it preignited and threw a rod through the block. Was making around 380 whp at 4200 rpm thats without a proper tune. So now i will be building the motor up. I plan on doing the stage 3 long block in the next month or two. should be able to run a few more pounds of boost and drag about 450 whp out of it. The dyno will tell:fingersx Good luck CP Pistons .020 over
Pauter Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced to 50%
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
New OEM Head Gaskets
Heads inspected and cleaned
Heads redecked
Ported exhaust and intake runners
JWT S1, S2, C2, or "S7 RevUp" Upgraded Cams
JWT Heavy Duty Valve Springs
5 angle radius cut valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads assembled
New OEM Rev-up Oil Pump
2006 G35 Coupe 6mt. Turbonetics Turbo, Utec ECU, Intense Wideband, Stance coilovers, Jim Wolf LW Flywheel, Top Secret Front bumper, Clear markers, 20'' EXE rims on 275/30/20 rear 245/30/20 fronts, Skyline Emblems, XM Sat radio.  Its not the pace of life that concerns me its the sudden stop at the end!
|
USAF_G35_Guy
Offline
370 posts
2003 G35 Coupe 6MT
tulsa ok
7-29-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (2mhighside) | 12:11 PM 1/24/2008 |
|
^ DOH!!! that's the first I've heard you threw a rod dude! That really, sux, sorry to hear that. Oh well, at least now you can build it up and have more faith in the block to take the abuse, plus it'll have more longevity....not to mention bigger HP #'s  I bet you'll have a nice write up when you're all done. Good luck with it man!.....oh btw, your going with an OEM Head Gasket? Ya might wanna upgrade that while you've got it apart. Probably around 140ish for both of em. Here's a site...just to give you an idea http://www.importperformancepa....html but you can get em alot of places.
AEM WAI, Crawford plenum, matching throttle body, Unichip comp module, JWT Cams, Stillen Headers, Crawford HF Cats, Stillen piping w/ Flowmaster exhaust(to throaty/loud if anyone wants to trade or buy, sounds badass though), PowerEnterprise radiator, Nismo Thermostat , Stillen oil cooler, JWT Clutch and LW Flywheel, Stillen & WeaponR engine dampers, Stillen sway/camber, Tokico D-Spec shocks, Eibach Pro-kit lowering springs, Sun Hyper voltage system & grounding kit. Greddy front, Stillen sides/rear, Axis Hiro 19's, Brembo's, Shelby Car Alarm
|
2mhighside
Offline
147 posts
06 G35 Coupe MT
Granbury TX
9-20-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (USAF_G35_Guy) | 12:19 PM 1/24/2008 |
|
Yeah blew it up a month ago or so. I was on my way to get some connectors to hook up my MAP sensor so my ECU would do a better job of adjusting timeing and such. I was doing about 130mph down the HWY and was just squeezing into it at about 5000rpm i could here a strange noise that i was trying to figure out what it was. Turns our we call that pre ignition and the next thing i knew it was POOF. Ive never seen so much smoke blow out the back of a car before. It was quite impressive. Anywho it now sits up on jackstands in my garage for now. Im back working in Saudi right now so i can afford to fix it when i get home. It will be fun to build up a better motor for it. The thing was scary to drive before wait till im done with it. 
|
USAF_G35_Guy
Offline
370 posts
2003 G35 Coupe 6MT
tulsa ok
7-29-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (2mhighside) | 12:35 PM 1/24/2008 |
|
I'll be joining you in that part of the world in about a week dude  I'll be bouncing back and forth from Kuwait and Iraq, but I'll probably be in Iraq most of the time. Again....Good Luck with the build when you get back! I'll probably ST or SC mine when I get back too. I'll learn from all your mistakes haha j/k
|
2mhighside
Offline
147 posts
06 G35 Coupe MT
Granbury TX
9-20-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (USAF_G35_Guy) | 12:42 PM 1/24/2008 |
|
Hey im great at making mistakes and i only hope others can learn from them. Ill be happy to offer any kind of advice to others wanting to go FI. I learned alot along the way on this little project. It was fun to install myself but it took WAY longer than the directions said. It would probably still be in one piece if i had had the time to get it tuned professionaly before i left and i just continued to push it. PLAY PLAY BREAK!
|
audtatious
Nom Nom Nom
Offline
24334 posts
2008 G37s Coupe - 2007 G35s Sedan
Jeff/Louisville
10-27-2002
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (beancooker) | 1:15 PM 1/24/2008 |
|
| Quote, originally posted by beancooker » | | I am not sure if anyone in the G35 forum has twin turbod their car. I know that the Moderator of the 350Z forum "Turbo6" has put twins on his, and IIRC, he's putting out well over 450HP. He also built his entire engine, to accommodate the extra power. He is most well known for his 9.38 second @ 147 MPH Lexus SC300. |
He is also known here as an X-Maxima moderator who had a 560hp+ turbo Maxima 
|
gday
Offline
107 posts
The City of Angels CA
10-21-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (audtatious) | 4:58 PM 1/24/2008 |
|
Powers don't mean anything if you're hitting 13's on the 1/4 with a TT kit, and over 20k invested. If I were to build a track car, it would most def. not be a G35. Maybe a 350z or a Supra.. The G is just way too heavy. The best I've seen a G do is low 12's.. With the same mods, the 350z can kit mid 11's...
FS: Work Varianza T1S Blk Chrome Wheels. 19x9.5, 19x10.5 - Brand new
|
2mhighside
Offline
147 posts
06 G35 Coupe MT
Granbury TX
9-20-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (gday) | 6:57 PM 1/24/2008 |
|
Well arent you the Debbie downer. 
|
TeflonG35
Offline
2062 posts
2003 G35 Sedan
Newark DE
1-18-2008
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (2mhighside) | 7:13 PM 1/24/2008 |
|
But 350zs are more common, and more commonly modified. Most g35s are owned by older people. Most really aren't concerned with turbos and superchargers. So when you have a supped up g35 you seem more of a rarity, more special. Hell i have a sedan, most people think my car is a joke untill i **** on them. And i don't have half the upgrades some of these people have.
2003 G35 Sedan
Kinetix V+ Plenum, Unorthodox racing underdrive pulleys, Stillen z-tubed. Stillen intake, Stillen cat back, Stillen grounding wires, Engine Damper(Needs to be installed), Mishimoto 14in. Performance Slim Radiator Fan, Megan Racing Headers(Needs to be installed), Test Pipes, Stillen cowl hood, Black side markers, Tint| Quote, originally posted by numbnuts240 » | | new porn every day. i don't fap to yesterday's mashed potatoes. |
http://www.myspace.com/brandnamesoda
|
krytiuk
Offline
53 posts
Barrie ON
12-12-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (gday) | 7:58 PM 1/24/2008 |
|
Thanks,I was debatting whether its worth it to invest the money to run 12s. I will be starting a c5 corvette project soon, and it will be more beneficial to dump the money into that. If I could run 10s with a tt kit and a built motor, then I think it would be worth it. But I agree 20 k for 12 s is a waste. 
|
BrandAidDesignG35
Almost there.
Offline
1372 posts
04' G35 sedan + 98" Altima GXE
Halifax Canada
12-29-2007
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (krytiuk) | 9:16 PM 7/2/2008 |
|
No, come back  Would you prefer 12's in style, or 11's with rice? 
2004 G35 Sedan - 14.4 @ 99 mph VQ35DE 20" Stern ST-1's w/ Nexen N7000 245/35/20R & 18" 350 Z wheels, Limo tint BLOX 5/8 spacer Fujita F5 Competition Intake Greddy EVO II "SBD Grounding Wire kit engine tourque damper kit 05 rear end conversion Cross drilled Performance brakes Black grill Premier 10" in Bassworx ported w/ 1.5 farad cap / MTX amp + 98 altima GXE KA24DE K&N; CAI spoiler NRG Grounding kit Premier Alarm system Aspec Exhaust JVC MP3 10" Alpine 600w MTX euro lights clear corners
|
audtatious
Nom Nom Nom
Offline
24334 posts
2008 G37s Coupe - 2007 G35s Sedan
Jeff/Louisville
10-27-2002
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (BrandAidDesignG35) | 10:13 PM 7/2/2008 |
|
| Quote, originally posted by BrandAidDesignG35 » | | No, come back Would you prefer 12's in style, or 11's with rice? |
OW!!! 
|
Sentientbydesign
Supporting Member
Offline
6128 posts
05 G35 6MT coupe, 00 Celica GT 5MT
Riverside CA
2-2-2005
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (krytiuk) | 12:05 PM 7/3/2008 |
|
I'd like to see what a G35X TT with a rebuilt tranny would run.Not sure if the AWD system could handle that much power though.
Modified non rev-up lower plenum | K&N; Drop In Filter | Hawk HPS Pads | SBD (me) Cobalt Blue Grounding Wires | Smoked Tails | RPS Cyn-R-G/Street Clutch comboF/S:G35/350Z/FX35/Altima Grounding Kits What are you running? Brake Setup Poll -- Plenum/Spacer/Intake Manifold | Quote, originally posted by Mr1der » | | go see her, have the most brutal sex ever, then drink most of her milk from the carton and leave. |
|
joe603
Super Moderator
Online
6576 posts
05 G35 coupe
Hampton GA
11-21-2005
|
The G will never run with a Vette...but the Vette is a sled on wheels for 2 people. Not very practical. If you want to run cheap 11's, find a late model F-Body and boost it
Read the G-Series FAQ! - G-Series Forum Main Page - Tire Size Calculator"A person who never made a mistake never tried anything new." -Albert Einstein
|
mike800+rwhp
Offline
30 posts
03 G35tt and 06 G35
vero beach fl
4-22-2007
|
| « Re: (joe603) | 2:11 PM 7/9/2008 |
|
What are you talking about I know two G35 TT that run in the 11's and I own one.
Twin Turbo G35. Crazy sound!!!!!!
|
superchargedg
Offline
49 posts
timonium md
12-14-2007
|
| « Re: (mike800+rwhp) | 5:10 PM 7/9/2008 |
|
And a big +1 as i have run low 12's.
|
Beancooker
Spoolin' Past You
Offline
10401 posts
'09 Blandmobile
Rain City WA
6-26-2006
|
| « Re: (mike800+rwhp) | 6:30 AM 7/10/2008 |
|
Hey Mike. We had been waiting for an update on your build thread. I guess that's a pretty good update.
|
mike800+rwhp
Offline
30 posts
03 G35tt and 06 G35
vero beach fl
4-22-2007
|
| « Re: (Beancooker) | 12:17 PM 7/10/2008 |
|
That video took place in 06 when the car weighed 3,350 and was on 17psi and making around 500rwhp. Since then I have removed 300 pounds and a whole bunch of upgrades and it's now making 570rwhp at 17.8psi with the good to now I've been able to run 21psi and let me tell you breaking the tires loose at 70 mile-per-hour is fun. I updated the build thread a little and there will be more to come building a new engine a little different than everyone else.
|
snwbrdr435
534rdrbwns
Offline
9423 posts
2000 I30, 2008 EX35, 2003 CBR F4i
north shore ma
6-28-2007
|
| « Re: (mike800+rwhp) | 10:19 AM 7/13/2008 |
|
well now your g sounds amazing
Want Some More Power Out Of Your Maxima Or I30! Check Out My Y-Pipe!
My Flickr PhotoStream
|
tollboothwilley
NICO Junkie
Offline
2716 posts
2003 G35 Sedan w/ NAV
Peoria/PHX AZ
8-26-2007
|
| « Re: (snwbrdr435) | 10:57 AM 7/13/2008 |
|
Ya, that was awesome. Now you just gotta get the Cosworth build on the motor and rev it up to 10K
Stillen Airbox || JWT Popcharger || Z-Tube || DCE TB Spacer || GroundingGear || MD 1/2" Copper Iso-thermal || Headers || Kinetix HFC || Motordyne XYZ + VQ Exhaust || 350Z Revised Suspension || SPC Rear Camber Kit || Stillen Sway Bars || SPL Endlinks || Circuit Sport Tie Brace || NRG Strut Bar || Stillen Rear Bumper Lip || M3 Lip Spoiler || Stillen Torque Damper || JDM Clear Corners || Catch Can || 2* Timing Advance || E-fan Conversion || UR Light Crank Pulley || Billet Grille || OC Cliffhanger Rotors || ATE SuperBlue Brake Fluid || StopTech SS Brake Lines || 19" Stern ST-1 || Greddy EMB 247whp, 230tq
|
audtatious
Nom Nom Nom
Offline
24334 posts
2008 G37s Coupe - 2007 G35s Sedan
Jeff/Louisville
10-27-2002
|
| « Re: (mike800+rwhp) | 11:11 AM 7/13/2008 |
|
| Quote, originally posted by mike800+rwhp » | | What are you talking about I know two G35 TT that run in the 11's and I own one. |
Very nice. That 11.6 is faster than a Murcielago LP640.
|
superchargedg
Offline
49 posts
timonium md
12-14-2007
|
| « Re: (mike800+rwhp) | 4:46 PM 7/13/2008 |
|
| Quote, originally posted by mike800+rwhp » | | That video took place in 06 when the car weighed 3,350 and was on 17psi and making around 500rwhp. Since then I have removed 300 pounds and a whole bunch of upgrades and it's now making 570rwhp at 17.8psi with the good to now I've been able to run 21psi and let me tell you breaking the tires loose at 70 mile-per-hour is fun. I updated the build thread a little and there will be more to come building a new engine a little different than everyone else. |
Very sweet man and im thinking of the car going on a diet also.
|
mike800+rwhp
Offline
30 posts
03 G35tt and 06 G35
vero beach fl
4-22-2007
|
| « Re: (tollboothwilley) | 11:20 AM 7/14/2008 |
|
I know it doesn't sound like the engines rev very high but it goes up to 7500 it just gets there so fast. Can the Cosworth engine really rev to 10k?
|
joe603
Super Moderator
Online
6576 posts
05 G35 coupe
Hampton GA
11-21-2005
|
Mike, might I suggest getting some slicks or at least some drag radial tires! I think you'll get into the 10's!!
|
Satter66
Offline
45 posts
2005 Black G35 Coupe
Kenosha WI
4-8-2008
|
| « Re: VQ35DE Twin Turbo Power - What are you guys making? (TeflonG35) | 10:56 AM 7/16/2008 |
|
Bean cooker - Did the pulleys help?
2005 5AT Black G35 Coupe. IFORGED 20" RIMS, Kinetix SSV Plenum, JWT Popcharger, HFC's, Injen SES Catback Exhaust, Clear corner lights. OEM front lip, mud guards, and rear spoiler. One confused wife as to the noise it makes now......
|
BrandAidDesignG35
Almost there.
Offline
1372 posts
04' G35 sedan + 98" Altima GXE
Halifax Canada
12-29-2007
|
| « Uhhhhhhhh!!!! | 10:33 AM 10/17/2008 |
|
| Quote, originally posted by joe603 » | | Mike, might I suggest getting some slicks or at least some drag radial tires! I think you'll get into the 10's!! |
Notice @ launch, the car was just slightly ahead for a split second? IF you had some drag radials with upgraded axels you could probably launch a wheely off your rear tires... You are my G35 God.  11.6 is really impressive, no, really... Yes the Cogsworth will rev to 10K...  or higher?? Anyway, Just to let you know, I played around in Gran Turismo and the best time I could get out of my "G35 " in the game was 9.3 @ 150mph. lol You're doing really well on street tires, believe me Best I got was 14.4 @ 98mph... lol Natural Aspiration... for now Wanna strip all the weight out like you, and get a full cage and seats etc... You're still inpiring me Mike
|
Jacko3
Offline
2622 posts
Fort Lauderdale FL
1-9-2008
|
| « Re: (mike800+rwhp) | 1:26 PM 11/13/2008 |
|
Mike:How is your car able to handle such a high level of boost? is the engine fully rebuilt? Are you using solid aftermarket clutch systems? How was your car tuned? All I could do after watching your video was wonder in amazement. Is the car in the video really a G-35 Coupe?
|
tollboothwilley
NICO Junkie
Offline
2716 posts
2003 G35 Sedan w/ NAV
Peoria/PHX AZ
8-26-2007
|
| « Re: (mike800+rwhp) | 10:24 PM 12/2/2008 |
|
| Quote, originally posted by mike800+rwhp » | | I know it doesn't sound like the engines rev very high but it goes up to 7500 it just gets there so fast. Can the Cosworth engine really rev to 10k? |
cylinder heads from cosworth 10.5K max RPM
http://www.cosworth.com/shop_i...d=442 short block fully built from cosworth paired to match the cylinder heads
http://www.cosworth.com/shop_i...d=464
|
| |
